How do i build a custom bmx bike? how do i know what size parts i need and how they will fit if i order online? - custom built bmx
I get a new bike compound (danscomp) I do not know what parts I need? What a top tube, neglect, and BB?
Friday, February 5, 2010
Custom Built Bmx How Do I Build A Custom Bmx Bike? How Do I Know What Size Parts I Need And How They Will Fit If I Order Online?
2 comments:
YOU NEED:
Setting: the top tube is the tube that was the head "headset and fork is combined with" seat tube "slide the seat post slides into it ..."
BB "BB" is the end of the seat tube. Maintain support restrictions to the bottom where the shaft goes through the handle.
Desertion is the pair of metal with grooves to hold them into the arms of the rear wheel on. connected to the rear in a triangle called the Security room and stay in the chain. are 3 / 8 or 14mm
This is the framework. Get in, that: is less than 5 pounds, 2.5 top tube, integrated headset.
Tires:
Buy a rear wheel with a cassette of 9 teeth, 36 radios. If you are with 14mm axles Grind, if not 3 / 8 to do. Make sure you buy a table for drop-size tree.
The front wheel ... replaced by 3 / 8 36 radios
Keeper: This is the front wheel to give a. Get one with 3 / 8 drop front wheel. 100% of chrome, light life implied warranty of MERCHANTABILITY only.
Headset: Enter the pipe, Shopping integrate integrated. They are generally the same.
Upper: the fork over the image slide, where you have installed a whole head. his mother to escape and leave Forks. the mother will also hold the chopsticks. Do you have one that is aluminum and light.
Bars: 8 cm high, 27 + inches wide, sweep, whatever you want. Chrome 100% lifetime warranty only. Get handles.
Seat / Saddle: Pivotal only
BB "BB", um, your picture, medium, or Spanish.
Screw Cranks: 3pc, light, maintain or pull the pin. I appreciate your ankles. 175 mm or 180 mm from any personal preference.
proclaims: Nevertheless, the use of plastic i
Sprocket: 25 teeth
Channel: Go to the average bond
Tires / Tubes: Street tires flat ground work for everything. To get tubes.
I know nothing about the brakes
Sardines: 14mm for the back, 3 / 8 to the front
Tools you need: metric and standard allen wrench, a key metric or LARGE / socMarket economy, key switch in the chain of burly, to sell the key to a dead blow hammer, hammer.
Buy Happy Fella
If you want to know which parts of size at your local store, they will still tick one box
Top tube is an axis that connects the head tube to seat pole / post
In the fall quiet not sure but I think you have 2 front and rear dropouts, where (they are attracting and the wheel where the tire is typically 14mm and deserters 3/8mm)
and the cranks or BB is what holds the crank on the crankshaft
Post a Comment